Status light patterns
1
symbol for light off
2
symbol for light on
3
symbol for light blinking
Status light patterns
Status lights
Condition of the printer
Action
Ready
The printer is ready to print.
No action is necessary.
Processing
The printer is receiving or processing
data.
Wait for the job to print.
Cleaning Mode/Engine test
A cleaning page or engine test page is
printing.
Wait until the cleaning page is finished printing
and the printer is in Ready mode. This could
take up to 2 minutes.
Wait until the engine test page is finished
printing and the printer is in Ready mode.
1
2
3
ENWW
Status light patterns 61
Return to
Finding the solution
.
Out of memory
The printer is out of memory.
The page you are printing might be too complex
for the printer’s memory capacity. Try lowering
the resolution. See
Understanding print quality
settings
for more information.
Door open, media out, no print
cartridge, or media jam.
The printer is in an error state that
requires operator intervention or help.
Check the following:
●
The print cartridge door is completely
closed.
●
Media is loaded. See
Loading media
for
instructions.
●
The print cartridge is correctly installed in
the printer. See
Changing the print cartridge
for instructions.
●
There is no media jam. See
Clearing jams
for instructions.
Printer initialization
A printer initialization is taking place.
No action is necessary.
Fatal error
All lights are on.
●
Unplug the printer for 30 minutes, and then
plug it back in.
●
If the printer still has an error, contact
HP Support. See
Contact HP support
.
All lights are off.
●
Make sure that there is power.
●
Unplug both ends of the power cord, and
plug them back in.
Status light patterns (continued)
Status lights
Condition of the printer
Action
62 Chapter 6
ENWW